XLPE PVC PE Abc Aluminium Cable Five Core For Aerial Power
Transmission
Standard of ABC Aerial Bundled Cable
IEC228, IEC209, IEC60502, ASTM ANSI/ICEA S-76-474, NFC 33-209,HRN
HD 626 S1 / DIN VDE 0276 part 626 / BS7870/ GB/T12527-2008
Type of ABC Aerial Bundled Cable
| No. | Product Type | Application |
| 1 | PVC insulated aerial bundle cable | For aerial power transmission |
| 2 | PE insulated aerial bundle cable |
| 3 | XLPE insulated aerial bundle cable |
| 4 | Steel reinforced aluminum wire with PVC insulated aerial b undle
cable | For aerial power transmission, able to bear moderate pulling force. |
Production Range of ABC Aerial Bundled Cable
Voltage: 1kv, 10kv, 35kv
No. of cores: 1, 2, 3, 4, 5, 3+1, 4+1, 3+2
Nominal cross sectional area: 10~1500mm2
Construction of ABC Aerial Bundled Cable:
Phase conductor: copper, aluminum, aluminum alloy stranded
Neutral conductor: aluminum stranded(AAC), aluminum alloy
stranded(AAAC), Aluminum conductor steel reinforced(ACSR)
Insulation: PVC, XLPE, PE
(Remark: This is just the normal construction. HUANGHE CABLE can
also design and produce the cables according to your special
requirement.)
Application of ABC Aerial Bundled Cable:
Insulated Single Core Aerial Cable
Covered line wire is used primarily for overhead secondary
distribution lines.It is not an electrically insulated conductor
and is treated as bare conductor when installed.
Duplex Service Drop Cable
To supply 120 volt aerial service for temporary service at
construction sites, outdoor or street lighting. For service at 600
volts or lower at a conductor temperature of 75 °C maximum.
Triplex Service Drop Cable
To supply power from the utility’s lines to the consumer’s
weatherhead. For service at 600 volts or less (phase to phase) at a
conductor temperature of 75°Cmaximum for polyethylene insulation or
90°C maximum for cross linked insulation.
Quadruplex Service Drop Cable
Used to supply 3 phase power, usually from a pole-mounted
transformer, to the user’s service head where connection to the
service entrance cable is made. To be used at voltage of 600 volts
or less phase to phase and at conductor temperature no to exceed
75°C for polyethylene insulated conductor or 90°C for cross linked
polyethylene insulated conductors.
600V ABC Aerial Bundled Cable Data
| Number of Cores x Nominal Cross Section | Overall Diameter | Weight | Maximum Conductor Resistance | Minimum Breaking Load | Current Rating |
| No.×mm² | mm | Kg/Km | Ω/Km | kN | A |
| 1x16 RM | 8,0 | 74 | 1910 | 2,5 | 72 |
| 1x25 RM | 9,0 | 106 | 1200 | 4,0 | 107 |
| 1x95 RM | 15,4 | 333 | 0,320 | 13,7 | 240 |
| 1x185 RM | 21,0 | 611 | 0,164 | 28,7 | 389 |
| 1x240 RM | 24,0 | 801 | 0,125 | 37,2 | 467 |
| 2x16 RM | 15,6 | 147 | 1910 | 2,5 | 72 |
| 2x25 RM | 18,0 | 208 | 1200 | 4,0 | 107 |
| 2x70 RM | 25,4 | 505 | 0,443 | 10,7 | 205 |
| 4x16 RM | 18,8 | 286 | 1910 | 2,5 | 72 |
| 4x70 RM | 31,8 | 1.009 | 0,443 | 10,7 | 205 |
| 4x95 RM | 37,8 | 1.332 | 0,320 | 13,7 | 240 |
| 4x70 + 1x25 RM | 360 | 1105 | 0,443/1,200 | 10,7/4,0 | 205/107 |
| 4x70 + 2x25 RM | 400 | 1217 | 0,443/1,200 | 10,7/4,0 | 205/107
|
